|
|
Join our Team! for more info. |
On this page: State of the Art Service Center
|
Dyno computer
|
|
dyno tuning | |
|
horsepower readings | |
|
torque readings | |
|
air/fuel ratio monitor | |
|
fully computerized | |
|
for bikes, quads, karts, Legends | |
|
fuel injection programming |
Legends Car on Dyno

Bike on Dyno
|
precision boring | |
|
honing | |
|
sleeving | |
|
o-ring blocks |

Boring Bar
|
cut seats | |
|
install guides | |
|
face valves | |
|
porting |

Valve Service
|
undercut gears | |
|
deck blocks & heads | |
|
fabricate parts |
Lathe

Mill
|
press & true cranks (rod kits) | |
|
weld cranks | |
|
install Race Tech suspensions | |
|
rebuild & sync carbs, exhaust gas analysis | |
|
do any mechanical work | |
|
no job too big or small |

Hydraulic Press
· Drain dirty oil, change oil and filter. A hot oil change is best.
· Drain the carburetor fuel bowls.
· Disconnect and remove the battery. Store inside and charge monthly.
· Gas tank either full or empty. If full, add gas stabilizer. If empty, spray inside with WD-40.
· Wash, dry and wax (polish) before storage to inhibit corrosion.
· Cover bike with bike cover or soft blanket.
· Store inside if possible, otherwise protect from the elements.
· If stored outside, remove spark plugs and pour a small amount (1 teaspoon) of 2 cycle oil into cylinders. Re-install the plugs.
P.S. If you have any questions, either call (403-277-0152) or drop in (Bay 1A, 3924 - 3A St. NE, Calgary). We offer winterization and premium winter storage at $90.00 per month.
Winter projects / storage packages available, example spend $1000 and get 1 month free storage.
Personalized Customer Service.

|
Last modified: January 30, 2010Copyright © 2002-2010 Universal Cycle Services Ltd.
Web site developed by Brent Hackl @ RaceIT
|