NOCO Genius G1100 Battery Charger
WICKED CAPABILITY, WICKED SMART!
The G1100 is a smart, 7 Step, fully automatic switch-mode battery charger and maintainer. The G1100 is best for small battery applications from 2.2-40Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G1100 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks.
WHAT'S IN THE BOX
Battery Clamp Connectors
Eyelet Terminal Connectors
Owner's Manual & User Guide
WICKED SMART FEATURES
Charges 6V & 12V batteries
DESIGNED FOR SAFETY
Reverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent & overcharge
VARIABLE INPUT COMPENSATED
100% full charge even with varying A/C input voltages
Automatically shuts "off" if charger remains in Bulk charge mode for an extended period of time
Returns to last selected mode when restarted
HF/HE SWITCH MODE DESIGN
High-frequency, high-efficiency for lightweight, compact charger
Recovers deeply discharged & sulfated batteries with pulse charging
Plug-n-play connectors for easy accessory changes
Automatically adjusts itself to changing current needs
RAPID CHARGING TECHNOLOGY
Charges batteries 2X faster than traditional linear battery chargers
MULTIPLE BATTERY CHEMISTRY
Safely charges Wet, Gel, MF & AGM batteries
Optimized charge mode for cold weather or AGM batteries
WICKED SMART FEATURE
The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process based on organic feedback from the battery to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery.
COMFORT CABLE CLAMPS
Ergonomically designed to make battery connecting and disconnecting effortless. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads.
BUILT-IN FUSE PROTECTION
Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits.
Connecting and disconnecting accessory leads has never been easier! A uniquely designed interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch.
Made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments.
G1100 TECHNICAL SPECIFICATIONS
Input Voltage AC - 110-120 VAC, 50-60Hz
Working Voltage AC - 85-130 VAC, 50-60Hz
Input Current - 600mA RMS Max
Efficiency - 85% Approx.
Power - 30W Max
Charging Voltage - 7.2/14.4, 7.4/14.7V (Cold/AGM)
Charging Current - 1100mA
Back Current Drain - <5mA
Ripple - <2%
Ambient Temperature - 0°C to +40°C
Charger Type - 7 Step, Fully Automatic, Switch-Mode
Type of Batteries - 6V & 12V Lead-Acid
Battery Chemistries - Wet, Gel, MF & AGM
Battery Capacity - 2.2-40Ah,
Maintains All Battery Sizes
Housing Protection - IP65
Cooling - Natural Convection
Noise Level - <50dB
Dimensions (L x W x H) - 6.1 x 2.5 x 1.6 Inches
Weight - 0.8 Pounds
Step 1: Diagnostics
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
Step 2: Recovery
Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current.
Step 3: Soft Start
Begins Bulk charging process with a gentle (soft) charge.
Step 4: Bulk
The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs.
Step 5: Absorption
Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.
Step 6: Trickle
Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current that the battery needs. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance.
Step 7: Maintenance
Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.