3924 - 3A St NE, Calgary, AB, T2E 6R4 Call us: 403-277-0152 general@universalcycle.ca / drayko@universalcycle.ca
• Flat rate shipping of $10 on orders over $99* • FREE SHIPPING on orders over $199*
*This offer applies to items under 10lbs / cubed weight. No PO BOX or RR Addresses.
• 10% OFF In Store Pick Up - Use coupon code: THANKYOUCALGARY
SW-Motech
SW-Motech Crashbar KLR 87-07
$339.00
SW-Motech Crashbar
Fits: 1987 - 2007 Kawasaki KLR650
Part number: SBL.08.274.100
Colour: Black
Description:
All components are protected against corrosion by sandblasting and powdercoating.
High-strength frame mounting points.
Constructed of 26.9mm outer-diameter mild steel tubing.
Fits with:
– original Kawasaki plastic skidplate
– Twisted Throttle’s aluminum skidplate (sold separately)
Requires modification (notches cut in plate) to work with:
– Ricochet (a.k.a. Utah Sport Cycle / Happy Trail / MSR / Moose) skidplate (made in the USA)
– Cyclops (a.k.a. Studebaker / KLR650.com) skidplate (this is an overseas copy of the Ricochet skidplate)
Does not fit with oversize IMS plastic fuel tank installed
The infamous KLR650 “Doohickey” (the left-side balancer chain tension adjuster) is accessible with the crashbar installed.
Includes two metric M8x70 replacement bolts to upgrade your original subframe bolt strength (located between the rear end of the tank and the front end of the seat) from grade 8.8 to grade 10.9 – stronger is better!
If the crashbar will be used with an SW-MOTECH centerstand please request the additional hardware kit “for use with centerstand” which includes four additional M8x40 hexagon socket head screws (4x part SC.00.08.040.01.912).
Fits: 1987 - 2007 Kawasaki KLR650
Part number: SBL.08.274.100
Colour: Black
Description:
All components are protected against corrosion by sandblasting and powdercoating.
High-strength frame mounting points.
Constructed of 26.9mm outer-diameter mild steel tubing.
Fits with:
– original Kawasaki plastic skidplate
– Twisted Throttle’s aluminum skidplate (sold separately)
Requires modification (notches cut in plate) to work with:
– Ricochet (a.k.a. Utah Sport Cycle / Happy Trail / MSR / Moose) skidplate (made in the USA)
– Cyclops (a.k.a. Studebaker / KLR650.com) skidplate (this is an overseas copy of the Ricochet skidplate)
Does not fit with oversize IMS plastic fuel tank installed
The infamous KLR650 “Doohickey” (the left-side balancer chain tension adjuster) is accessible with the crashbar installed.
Includes two metric M8x70 replacement bolts to upgrade your original subframe bolt strength (located between the rear end of the tank and the front end of the seat) from grade 8.8 to grade 10.9 – stronger is better!
If the crashbar will be used with an SW-MOTECH centerstand please request the additional hardware kit “for use with centerstand” which includes four additional M8x40 hexagon socket head screws (4x part SC.00.08.040.01.912).
Customer Reviews
This product has not yet been reviewed.
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend